Standing desks are all the rage now in today’s workplace. While many people I know with standing desks hardly use them, they’re at least there in case you want to stretch your legs every once in a while and get a good view around the office. And I suppose there are the health benefits of not sitting down throughout an entire work shift.

But choosing between a stand-up rider and sit-down forklift is about more than the potential health benefits. Using the correct piece of equipment can actually have a major impact on the safety of your workplace. This guide will help show you the pros and cons of both types of forklifts and point you in the right direction for your next purchase, lease, or rental decision.

On/Off Frequency – One of the main reasons you would consider using a stand-up rider is the fact that getting on and off the forklift can be considerably faster. With lower step heights and no seatbelt to take on and off, time spent entering and exiting can be cut down significantly. This is ideal for applications where operators are frequently getting off of the forklift throughout the course of their shift for activities such as picking product. The time and labor cost savings can really add up over time, depending on the frequency of operators’ getting on and off of the forklift.

Performance – Sit-down forklifts can have higher travel speeds and lift/lower speeds than stand-up riders, which can increase productivity and throughput in high volume applications.

Lifting Capacity – Stand-up rider and sit-down forklifts are both counterbalanced type forklifts. When comparing a stand-up rider to a 3-wheel electric with the same base capacity, you typically get more lifting capacity from the stand-up rider at higher lift heights due to the compact design and centralized center of gravity. Four-wheel electric models, however, typically attain the highest lifting capacities overall.

Purchase Price – The initial cost is typically higher for stand-up rider forklifts when compared to 3-wheel electric models.

Right Angle Stack – In general, right angle stacking capabilities are fairly similar between 3-wheel electric and stand-up rider models with similar capacities. Stand-up rider forklifts, however, usually have a small advantage due to their shorter length and can operate in slightly smaller aisles. Both stand-up rider and 3-wheel electric forklifts have a significant advantage over 4-wheel electrics in regard to minimum aisle width requirements.

Operator Preference – Operator preference tends to play a large role in most purchasing decisions for new equipment. Operators who are used to operating sit-down forklifts are generally resistant to swapping their sit-down for a stand-up rider and vice versa. The main reasons for this are the differences in operating position and operability. Stand-up riders are typically controlled by a single multi-function control handle while sit-down forklifts use conventional cowl-mounted levers or mini-levers. Sit-down forklifts also have traditional brake pedals, while stand-up riders use “plugging” (requesting travel in the opposite direction) for braking and have a dead man pedal for emergency braking. Being familiar with a particular operating style promotes safety and can help to increase productivity and operator confidence. But over time, operators tend to adjust and get used to the new controls and nuances.

As always, if you’re unsure of which product is right for you, reach out to Dillon Toyota Lift for advice and consultation based on your material handling needs.

Great news! Your company is growing. You’re bringing in more orders, expanding your warehouse and increasing business every day. But this means you will need to invest in some more material handling equipment. There are many different types of equipment to choose from, and a clear understanding of multiple aspects of your expanding business can help you understand your forklift fleet and its needs. So before you procure a new forklift, make sure you check out these helpful hints to make sure you are getting the right one!

Forklift Fleet Expansion: Inspect Your Warehouse

You need to make sure you match up your equipment with the blueprints of the changing warehouse. Can you stack higher? Expanding up is often an option, but you need the industrial equipment to match the task. Or is all of your product being moved along the ground? Maybe you need to increase your moving speed. These are vital questions when looking into the right forklift. Make sure you also take a look at your racking, and consider what equipment can enter where needed, helping you in hard to reach places. Lastly, make sure you take a look at your aisle widths. Forklifts come in all different sizes, and making sure it has enough room to operate is extremely important. Make sure you have a good understanding of calculating forklift aisle width minimums.

Know Your Product

After unloading so many shipments of your product, you should hopefully have a good grasp on how heavy it is. But if you’re expanding to new product lines or needing to lift them higher than you used to, your grasp on your requirements might be slipping. Making sure you have a forklift with enough capacity to handle your products is crucial. You will need a forklift that can lift what you need it to. Pushing a smaller forklift to its capacity limits can be dangerous, and could cause lost product, as well as injured workers. The same is true if your load center has changed and your forklift isn’t ready to handle the extension of new pallet lengths. Toyota has forklifts of every size, from hand pallet jacks to loaded container handlers. Our Find a Forklift tool can help you determine the right forklift for your lifting capacity and load center.

Understand Operator Needs

Acquiring a forklift is a big commitment. As a manager, your team will be using this machine almost every day. As an operator, this is the tool that will hopefully allow you to do your job safely and with maximum efficiency. Which is why you will need to make sure you look at all the options and accessories that come with the forklift. If your warehouse has blind intersections, you may want to look into different types of pedestrian lights to help reduce the risk of accidents. There are also options like a fire extinguisher and many others that might be excellent for your specific applications. Toyota offers different types of accessories that help with ergonomics, keeping operators healthy and less fatigued after a long day. This includes an optional rear assist grip with horn button on many models that can make driving in reverse less taxing.

While there are other things you may need to look over, deciding on a forklift during times of expansion should not be an impulse buy. You need to make sure you scale up your forklift fleet in a way that makes sense for the scale of your specific business. There are many different variables that go into the decision making process. Take your time, and double check that you are getting the forklift that will help your business grow. Operators should be clear about their needs and managers should have open lines of communication with their operators. This communication will be paramount in a successful fleet expansion.