Electric forklifts can be beneficial in many different work indoor applications (and now even outdoors with Toyota’s 80-Volt Electric Pneumatic Forklift). Using electric forklifts in your warehouse is one of the most common uses of these machines and for good reason. Electric warehouse forklifts can reduce fuel costs and be charged at intervals that can maximize efficiency across shifts. Take a look at some of the following benefits electric forklifts could have in your warehouse space.

Electric Warehouse Forklift Benefits

LESS NOISE

You may not think about it, but having a quieter forklift may impact you or your operator’s ability to operate safely and effectively in certain applications. In smaller, confined spaces, with multiple forklifts running, it could get pretty loud. With electric forklifts, it lowers the noise level, allowing for easier communication, and less fatigue from your operators. Really, the only noise that electric forklifts have is the horn. In certain warehouses, this can make it easier for operators and pedestrians to hear forklift horns, co-workers, or other important workplace sounds.

LOWER EMISSIONS

When you are using a gas or LPG burning forklift, you are producing emissions that could be harmful to your associates and products if not properly addressed. Electric forklifts do not generate any CO emissions. This helps keep your employees healthy and lower the impact of emissions in your warehouse.

Certain products can also be harmed by emissions including food items, other perishables, and various consumer products. Toyota electric forklifts come in a wide variety of lifting capacities to fit many different applications. Also, fewer emissions are great for the environment!

If you are using a gas or LPG forklift in your warehouse instead of electrics, we understand there are many reasons that might have influenced that decision, and Toyota is the U.S. leader in internal combustion forklifts. However, make sure you are using proper ventilation techniques if you’re using one in your warehouse.

A WIDE RANGE OF OPTIONS

Because your warehouse needs to maximize space, it could be hard to fit a full-sized forklift down your narrow aisles. An electric warehouse forklift can help solve that issue. At Toyota, we have many different electric forklifts to fit your needs. Maybe you need to squeeze in those narrow aisles? The 3-wheel electric would be perfect. It has a tighter turn radius than most forklifts but still has the capacity to lift up to 4,000 lbs. Maybe your warehouse stacks pallets behind each other. This is where reach trucks work great. Being able to place pallets in front of each other makes sure you are maximizing your warehouse space and racking. No matter what type of warehouse blueprint you have, Toyota Material Handling has an electric forklift to fit your needs!

OPERATING COST

When it comes to the operating cost of forklifts, electric forklifts can usually be lower than that of internal combustion models. While IC models run on gas, electric forklifts run on, well, electricity! You may need to set up a charging station in your warehouse, but the cost of electricity can be significantly lower than that of fuel.

While IC models are still the most popular in the market, electric forklifts are increasing in popularity. So remember, if you are looking to increase productivity and ROI in your warehouse, take a look at all of the different electric forklift options from Toyota.

Building a forklift that works perfectly for every application can be challenging. After all, what works for a small mom and pop retail store may not work as well for a high-throughput forging application. Options such as lights and attachments allow you to customize each forklift to fit your needs, but did you know that adjusting forklift settings can be just as critical to optimizing performance and efficiency?

Many forklifts today come standard with pre-set performance and operational settings that can be adjusted either through a built-in multi-function display or an external device such as a laptop. Toyota’s Core Electric and 3-Wheel Electric models, for example, each have over 60 different settings that can be fine-tuned through the display. These settings are protected via passwords to prevent access to unauthorized users.

Settings on Toyota forklifts are highly adjustable as most parameters have eight or more levels of adjustment. Understanding how these settings affect forklift operation is the first step in realizing productivity and efficiency gains. Below are a few examples of settings that can be adjusted and how they can impact your operation. If you feel like you may benefit from optimizing your forklift’s parameters.

Toyota Forklift Acceleration, Speed, and Braking Adjustments

Travel/Acceleration – These speeds can be adjusted to increase productivity or slow down forklifts for when precise handling is necessary. These settings can also provide energy savings in applications where quick acceleration or faster travel speeds are not necessary.

Accelerator Pedal Response* – Adjusts sensitivity to the initial depression of the accelerator pedal. Higher settings will reduce the delay between when the pedal is depressed and when the forklift begins to accelerate.

Rollback Speed* – Trucks with the rollback feature have a momentary delay followed by a controlled descent when the accelerator pedal is released while on a grade. This setting allows the travel speed and time before rollback to be adjusted.

Over Speed Alarm – An alarm sounds on the forklift when a pre-set travel speed is exceeded.

Regenerative Braking* – Adjusts how quickly the truck slows down when the operator’s foot is taken off of the accelerator pedal. Strength of “plugging” response can also be adjusted (when travel direction is switched between forward and reverse).

Toyota Forklift Lift, Maintenance, and Power Adjustments

Hydraulic Functions – Lift, lower, tilt, and attachment speeds are all adjustable. This includes starting, inching, maximum, acceleration, and deceleration settings. These settings can also provide energy savings in applications where faster hydraulic speeds are not necessary.

Lift Interrupt Level* – Used to tune the depth of discharge of a battery before the truck reaches lift interrupt. When the battery reaches the set level, the lift function will be disallowed. This allows the forklift to be matched to the battery size and type that is installed.

Planned Maintenance Hour Meter – An alarm sounds to inform the operator when the forklift is due for planned maintenance. The maintenance period can be adjusted and the alarm can be overridden.

Engine Auto Off/Auto Power Off – Engine (IC models) or battery power (electric models) will automatically turn off during a certain period of inactivity. The amount of time before it turns off can be adjusted or the setting can be turned off entirely.

*Applies to electric forklifts only.

Original Post: Trinton Castetter, Product Marketing Specialist, TMH

Building a forklift that works perfectly for every application can be challenging. After all, what works for a small mom and pop retail store may not work as well for a high-throughput forging application. Options such as lights and attachments allow you to customize each forklift to fit your needs, but did you know that adjusting forklift settings can be just as critical to optimizing performance and efficiency?

Many forklifts today come standard with pre-set performance and operational settings that can be adjusted either through a built-in multi-function display or an external device such as a laptop. Toyota’s Core Electric and 3-Wheel Electric models, for example, each have over 60 different settings that can be fine-tuned through the display. These settings are protected via passwords to prevent access to unauthorized users.

Settings on Toyota forklifts are highly adjustable as most parameters have eight or more levels of adjustment. Understanding how these settings affect forklift operation is the first step in realizing productivity and efficiency gains. Below are a few examples of settings that can be adjusted and how they can impact your operation. If you feel like you may benefit from optimizing your forklift’s parameters, please reach out to your local Toyota dealer for expert support and service.

Toyota Forklift Acceleration, Speed, and Braking Adjustments

Travel/Acceleration – These speeds can be adjusted to increase productivity or slow down forklifts for when precise handling is necessary. These settings can also provide energy savings in applications where quick acceleration or faster travel speeds are not necessary.

Accelerator Pedal Response* – Adjusts sensitivity to the initial depression of the accelerator pedal. Higher settings will reduce the delay between when the pedal is depressed and when the forklift begins to accelerate.

Rollback Speed* – Trucks with the rollback feature have a momentary delay followed by a controlled descent when the accelerator pedal is released while on a grade. This setting allows the travel speed and time before rollback to be adjusted.

Over Speed Alarm – An alarm sounds on the forklift when a pre-set travel speed is exceeded.

Regenerative Braking* – Adjusts how quickly the truck slows down when the operator’s foot is taken off of the accelerator pedal. Strength of “plugging” response can also be adjusted (when travel direction is switched between forward and reverse).

Toyota Forklift Lift, Maintenance, and Power Adjustments

Hydraulic Functions – Lift, lower, tilt, and attachment speeds are all adjustable. This includes starting, inching, maximum, acceleration, and deceleration settings. These settings can also provide energy savings in applications where faster hydraulic speeds are not necessary.

Lift Interrupt Level* – Used to tune the depth of discharge of a battery before the truck reaches lift interrupt. When the battery reaches the set level, the lift function will be disallowed. This allows the forklift to be matched to the battery size and type that is installed.

Planned Maintenance Hour Meter – An alarm sounds to inform the operator when the forklift is due for planned maintenance. The maintenance period can be adjusted and the alarm can be overridden.

Engine Auto Off/Auto Power Off – Engine (IC models) or battery power (electric models) will automatically turn off during a certain period of inactivity. The amount of time before it turns off can be adjusted or the setting can be turned off entirely.

*Applies to electric forklifts only.

Original Post: ToyotaForklift.com