Warehouse receiving areas are some of the busiest places in a supply chain. Because of the variables involved with receiving such as unknown personnel (truck drivers) in your warehouse, the irregularity of goods received, and changing storage needs after product is received, this area in any operation can be very difficult to standardize. Amidst the controlled chaos of a receiving area, open dock doors that are not actively being used to unload a truck pose particular hazards for forklift operators and pedestrians. A lack of awareness of open dock doors can lead to dangerous situations that were more than likely preventable. Remembering a few important points about dock door safety might help increase safety while also maintaining as much efficiency as possible.

Reminders for Dock Door Safety

As an Operator, You Might Easily Back Off of One if You’re Not Paying Attention.

Even if you don’t see them in front of you, open dock doors are still there. It’s a major disaster if, in the middle of operating a forklift to handle material in the receiving area, an operator backs out an open door. Remember that awareness of what is behind you is key in maintaining dock door safety. Some dock levelers can be upgraded to automatically fold up into a protective barrier to help prevent the possibility of back off.

As a Pedestrian, You Might Easily Fall Off of One if Proper Precautions Are Not Taken. 

OSHA standards require that wall opening with a drop of more than 4 feet must be chained off, roped off, or otherwise blocked off. If this precaution is not taken, distracted pedestrians might walk off open docks, potentially being harmed in the fall and being left vulnerable in a busy receiving area where trucks are moving in and out. While ropes or chains meet the OSHA requirement for block off, heavy duty safety barriers can also be purchased (many times from certified Toyota dealers).

As a Pedestrian and Operator, You Might Easily Forget that Trucks Will Eventually Fill the Door. 

Dock doors are places where product is moved in quickly. Not every worker in an environment will know exactly when a truck will arrive. When working around a dock door, you must remember that semis are going to be pulling into those spaces, and drivers won’t always have the best visibility when backing in. Therefore, it is the responsibility of forklift operators and pedestrians to stand clear when a semi is arriving.
 

Original Post:  Jake Stewart, Digital Content Copywriter, Toyota Material Handling, USA

Your business is growing and you either need to expand your current warehouse or build a new warehouse to support your growth. Sounds like a good problem to have! At least, until you have to decide what type of pallet racking system you need to install. In its simplest form, a pallet racking system is a material storage system. Pallet racking helps you stay organized within your warehouse and better manage you inventory. Choosing pallet racking, however, is not as simple as selecting a pallet rack brand and installing it. There several racking types that help you meet your needs. The type of racking you choose depends on a few criteria:

• How tall the racking needs to be
• What goods will be stored
• What the floor plan will be
• What type of inventory management system makes sense for your product and operation
• What types of forklifts you currently use or forklifts you intend to switch to

Types of Pallet Racking: Selective Racking

Selective racking systems are some of the most common and widely used racking systems, mainly because they are less expensive and easier to install than other, more specialized racking systems. Selective racking is great for warehouses that store a large amount of stock keeping units (SKUs). Selective pallet racking is usually a single-deep pallet rack. This type of racking makes any given pallet in the rack system accessible without having to move another pallet.

Types of Pallet Racking: Cantilever Racking

Cantilever Racking systems are used to store items that cannot be easily stored on pallets. Warehouses that use cantilever rack, usually store longer and heavier items to be stored horizontally across multiple arms (like lumber or steel pipes). Pallet racks, on the other hand, have vertical uprights that limit the length of stored items. This is the primary difference between cantilever racking and pallet racking.

Types of Pallet Racking: Pallet Flow Racking

Pallet flow racking systems are also referred to as “gravity flow” racking systems. Pallet flow racking systems are best suited for the first-in, first-out (FIFO) inventory management methodology. When you load a pallet from the loading aisle and onto the lane rollers, gravity allows the pallet to roll to the front of the system. When the pallet is removed from the front of the racking system, the pallets behind roll to the front of the lane. Pallet flow racking allows for high-density storage while maintaining FIFO. Some pallet flow racking systems may hold up to 20 pallets deep in one lane, minimizing the number of aisles needed to store items while maintaining efficient inventory turnover.

Types of Pallet Racking: Push Back Racking

Push back racking systems is another high density storage option, with the ability to store up to six pallets deep on either side of an aisle. There are usually three carts stacked on top of each other.  The first pallet is loaded from the front in a push back racking system and sits on the top cart. When the second pallet is loaded, it pushes the top cart with the first pallet back. Push back racking gives you higher density storage than selective racking systems, while allowing you more selectivity with storing items than other types of racking, meaning you can store more SKUs.

Types of Pallet Racking: Drive-In Racking

Drive-In racking systems are great for storing large volumes of just a few SKUs and can also be configured to manage inventory with FIFO or last-in, first-out (LIFO). With drive-in racking, the forklift literally drives into the racking system to move a pallet. This type of pallet racking system is cost effective by maximizing the amount of storage space in your warehouse.

Choosing between these types of racking systems will depend on the various goals of your operation and the relevant inventory data like volume and throughput. No matter your decision, always be sure that this racking is installed safely and effectively to increase productivity.  Dillon Toyota Lift's Warehouse Solutions team is here to help from start to finish.  

Original post by:  Kenny Trusnik, Marketing Systems & eCommerce Specialist, Toyota Material Handling, USA