My Toyota StoreClient Login Catalog Financing Locations Contact
Standing desks are all the rage now in today’s workplace. While many people I know with standing desks hardly use them, they’re at least there in case you want to stretch your legs every once in a while and get a good view around the office. And I suppose there are the health benefits of not sitting down throughout an entire work shift.
But choosing between a stand-up rider and sit-down forklift is about more than the potential health benefits. Using the correct piece of equipment can actually have a major impact on the safety of your workplace. This guide will help show you the pros and cons of both types of forklifts and point you in the right direction for your next purchase, lease, or rental decision.
On/Off Frequency – One of the main reasons you would consider using a stand-up rider is the fact that getting on and off the forklift can be considerably faster. With lower step heights and no seatbelt to take on and off, time spent entering and exiting can be cut down significantly. This is ideal for applications where operators are frequently getting off of the forklift throughout the course of their shift for activities such as picking product. The time and labor cost savings can really add up over time, depending on the frequency of operators’ getting on and off of the forklift.
Performance – Sit-down forklifts can have higher travel speeds and lift/lower speeds than stand-up riders, which can increase productivity and throughput in high volume applications.
Lifting Capacity – Stand-up rider and sit-down forklifts are both counterbalanced type forklifts. When comparing a stand-up rider to a 3-wheel electric with the same base capacity, you typically get more lifting capacity from the stand-up rider at higher lift heights due to the compact design and centralized center of gravity. Four-wheel electric models, however, typically attain the highest lifting capacities overall.
Purchase Price – The initial cost is typically higher for stand-up rider forklifts when compared to 3-wheel electric models.
Right Angle Stack – In general, right angle stacking capabilities are fairly similar between 3-wheel electric and stand-up rider models with similar capacities. Stand-up rider forklifts, however, usually have a small advantage due to their shorter length and can operate in slightly smaller aisles. Both stand-up rider and 3-wheel electric forklifts have a significant advantage over 4-wheel electrics in regard to minimum aisle width requirements.
Operator Preference – Operator preference tends to play a large role in most purchasing decisions for new equipment. Operators who are used to operating sit-down forklifts are generally resistant to swapping their sit-down for a stand-up rider and vice versa. The main reasons for this are the differences in operating position and operability. Stand-up riders are typically controlled by a single multi-function control handle while sit-down forklifts use conventional cowl-mounted levers or mini-levers. Sit-down forklifts also have traditional brake pedals, while stand-up riders use “plugging” (requesting travel in the opposite direction) for braking and have a dead man pedal for emergency braking. Being familiar with a particular operating style promotes safety and can help to increase productivity and operator confidence. But over time, operators tend to adjust and get used to the new controls and nuances.
As always, if you’re unsure of which product is right for you, reach out to Dillon Toyota Lift for advice and consultation based on your material handling needs.
Dillon Toyota Lift is the authorized Toyota Forklift dealer in Idaho and Utah, providing solutions to all material handling needs since 1981. We are your full service provider for new and used forklifts, rentals, parts, service, and lift truck operator training.
Nampa : (208) 466.8994
Twin Falls : (208) 466.8994
Idaho Falls : (208) 466.8994
Salt Lake : (801) 972.1930
News & Events